STRUCTURAL STUDY OF ELECTRICAL CONDUCTIVE FABRIC

Authors

  • Akbarov Rustam Department of Science of Textile Material, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan
  • Karimova Barno Safarniyoz qizi, Department of Science of Textile Material, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan
  • Ochilov Tulkin Ashurovich Department of Science of Textile Material, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan

Keywords:

conductive fabric, friction resistance, strength,

Abstract

This article is woven by adding polyester fiber at intervals of every 10 mm to obtain an antistatic fabric. Polyester fibers with linear densities of 7.5x2 and 9x3 texture were used on the body and back. The density of the fabric on the body is 600 + 3 n / dm, the density on the back is 160 + 3 n / dm. The following properties of fiber were used in the fabric as an electrically conductive additive: cotton - 60%, conductive fiber (EO'T) - 40%, linear density - 50 tex, specific tensile strength - 9 sN / tex, elongation at break - 14%, linear electrical resistance - 18-20 km / m. The quality indicators of the obtained electrically conductive fabric were determined.

Downloads

Published

2021-04-23

Issue

2021: 4th GCCSA

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.